Welcome to Xinmingjie Technology Co., Ltd.

Products

Contact Us

You are here：Home >> Products >> Cisco >> Cisco Wireless >> Access point

Access point

AIR-AP1832I-H-K9C

1830i Series Wireless Wifi Indoor Access Point AP AIR-AP1832I-H-K9C
Industry-specific attributes
Products Status：Stock
Private Mold：NO
Brand Name：AIR-AP1832I-H-K9C
Product name：AIR-AP1832I-H-K9C
Condition：NIB Original
Warranty：1 Year
Type：Wireless AP
Application：Telecommunication
Shipment：DHL UPS FEDEX
    AIR-AP1832I-H-K9C Specification
    Software Unified Wireless Network Software Release with AireOS wireless controllers: 8.1.121.0 or later for the 1830 Series Access Points
    Deployment modes Centralized, standalone, sniffer, FlexConnect™, monitor, OfficeExtend, mesh
    Supported wireless LAN controllers 2500 Series Wireless Controllers, Wireless Controller Module for ISR G2, Wireless Services Module 2 (WiSM2) for ®6500 Series Switches, 5500 Series Wireless Controllers, 5520 Series Wireless Controllers, Flex® 7500 Series Wireless Controllers, 8500 Series Wireless Controllers, 8540 Series Wireless Controllers, 5760 Wireless LAN Controller, 3650 and 3850 Series Switches with integrated controllerMobility Express
    802.11n version 2.0 (and related) capabilities 3x3 MIMO with two spatial streamsMaximal ratio combining (MRC)20- and 40-MHz channelsPHY data rates up to 300 Mbps (40 MHz with 5 GHz)Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)802.11 dynamic frequency selection (DFS)Cyclic shift diversity (CSD) support
    802.11ac Wave 1 and 2 capabilities 3x3 MIMO with two spatial streams, single-user or multiuser MIMO MRC 802.11ac beamforming (transmit beamforming) 20-, 40-, and 80-MHz channels PHY data rates up to 867 Mbps (80 MHz in 5 GHz) Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx) 802.11 DFS CSD support
    Interfaces 1 x 10/100/1000BASE-T autosensing (RJ-45), Power over Ethernet (PoE) Management console port (RJ-45) USB 2.0 (enabled via future software)
    Indicators Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader errors
    Dimensions (W x L x H) Access point (without mounting bracket): 8.3 x 8.3 x 2 in. (210.8 x 210.8 x 50.8 mm)
    Weight 3.12 lb (1.41 kg)
    System memory 1 GB DRAM 256 MB flash
    Input power requirements AP1830: 44 to 57 VDC Power supply and power injector: 100 to 240 VAC; 50 to 60 Hz
    Power draw 15.4W Note: When deployed using a PoE specification, the power drawn from the power sourcing equipment will be higher by some amount, depending on the length of the interconnecting cable.
    Powering options 802.3af/802.3at Enhanced PoE local power supply, AIR-PWR-C= power injector, AIR-PWRINJ5= (Note:This injector supports 802.3af only), AIR-PWRINJ6= Note: If 802.3af PoE is the source of power, the USB port is disabled.
    Warranty Limited lifetime hardware warranty
    Please submit your basic information, we will contact you as soon as possible!

    *

    *

    *

    *

Related products

Copyright © 2017 Xinmingjie Technology Co., Ltd. All Rights Reserved.